Woodgroup Vacancies – 13 July 2026

To apply, click on the link at the end of the posts and all the best with your applications

Senior Planner

Job Description

• Provide support and inform the PM and construction manager (CM) in respect of progress measurement on the project.
• Prepare, issue and maintain the master schedule of the project.
• Schedule Resource loading and the development of Histograms
• Earned Value Management
• Review the bid milestones and overall completion timetable in conjunction with the project scope at award and identify any anomalies or inconsistencies.
• In collaboration with the project team and all other participants, develop the work breakdown structure (WBS) and integrate the code of accounts with the WBS.
• In consultation with the project team, identify key critical constraints and interfaces.
• Establish key milestone dates in agreement with the PM.
• Establish productivity norms, time standards and progress measurement criteria for all disciplines in liaison with project controls.
• Develop the basis of schedule (BoS) and / or schedule management plan for approval by the PM.
• Set up the interface between the schedule and the applied company / project system (if required).
• Ensure that commissioning considerations are established and catered for in the project program during program baseline development.
• Identify the critical path(s) and near critical paths in the project implementation schedule (PIS). Report slippages and gains against the baseline schedule.
• Monitor, control and report the status of free and total float in the schedule.
• Evaluate and integrate contractor’s and supplier’s schedules and report findings to the PM, CM and project engineer.
• Where required, assist the construction manager to implement shutdown schedules.
• Provide input and review proposed change management time implications and document the result.  Manage approved changes in the schedule. 
• Attend project and contract kick off, progress, cost control and planning meetings and manage changes in the schedule.
• Review the schedule portions of contractor’s extra work claims and prepare details for discussion and/or inclusion in any response.
• Assist project controls to produce management reports and the monthly status reports.
• Prepare and submit planning data for the project close out report and progressive learning (lessons learned).
• To undertake peer reviews of schedules produced by other planners upon instruction by the planning manager.
• Ensure that all plans and schedules are prepared and executed in accordance with the Company’s planning standards.
• Preparation of Early warnings and delay notifications

Responsibilities

• Provide positive and demonstrated leadership on HSSE & QA issues within your area of operation.
• Read, understand and implement the HSSE & QA policies, procedures and Beyond Zero programme.
• Promote an enthusiastic HSSE & QA culture that delivers positive commitment to and engages all employees in continuous improvement in business performance.
• Monitor personnel under your area of control comply with their individual responsibilities to HSSE & QA matters.
• Demonstrate on-going commitment to all relevant QA requirements as published to the organizations Integrated Quality Management System.
• Respond and commit to partaking in audits, and responding with relevant corrective action.
• Demonstrate commitment in resolving HSSE & QA non-conformances.
• General Responsibilities
• Actively role model and promote the company Values, Ethics and Code of Business Conduct.

Qualifications

Qualifications: 

• PMI SP (Scheduling Professional) 
• AACE PSP (Planning and Scheduling Professional)

Desirable:

• PMI PMP (Project Management Professional)
• CAPM (Certified associate in project management)

Knowledge, skills and experience:

• Experience in mineral/metals/mining greenfield and brownfield would be beneficial.
• Expert knowledge of and competence in the use of Primavera P6 and MS Project
• Expert knowledge of MS Office 
• Project planning experience in multi-discipline mining and minerals processing projects and studies
• Site planning experience in multi-discipline mining and minerals processing projects and studies
• EPC / EPCM experience in either a consulting or construction contractor environment
• 8 – 12 years’ relevant experience considered essential to meet the demands of this position.

Personal attributes:

• Strong team player
• Ability to work in a high-pressure environment.
• Attention to detail to ensure the accuracy of the outputs.
• Analytical thinker
• Excellent communication skills (verbal and written). 

Click here to apply

Mechanical Engineer

Job Description

• Ensure that designs are in accordance with project / study requirements and company objectives and are produced in a timely and cost-effective manner.
• To work in a safe manner, complying with and actively contributing to the WOOD Health, Safety and Environmental HSE policies, manuals and procedures. At all times considering the health, safety and welfare of fellow workers, visitors, clients, community and the environment.

Responsibilities

• Prepare/Review technical specifications, contract specifications, calculations, reports, design criteria, tender documentation, installation contract documents and other documents required by the project / study in accordance with project, discipline, statutory regulations, good-practice and company procedural requirements.
• Ensure project filing system is maintained and kept up to date in a discipline or project system.
• Ensure the that designs produced support the method of construction and ease of plant maintenance and operations.
• Ensure design engineering standards are maintained and adhered to on all projects.
• Review and comment on design documents and drawings from own discipline and from other disciplines.
• Review and approve vendor documentation for compliance with project / study specifications.
• Estimate, control, and review design scope changes.
• Attend factory acceptance tests and provide input into vendor’s test documentation.
• Liaise with client to ensure that design is in accordance with agreed requirements.
• Liaise with Site construction staff on technical queries on resolution of engineering design issues 
• Prepare project close out reports with comparison of design and procurement budgets.
• Conduct regular design group meetings within a project / study context.
• Provide timely reports regarding all discussions held and progress made. Ensure all correspondence is recorded.
• Allocate work and aid discipline engineers and designers on projects / studies.
• Input into progress reports, including listing achievements and highlighting issues as required.
• Provide input into proposals and man-hour estimates
• Work closely with other consultants and other disciplines and Project / Study Managers to ensure that client’s objectives are met in a timely manner.
• Ensure compliance and take initiative for safety and environmental issues.

Qualifications

Qualifications: 

• BSc, BEng or B. Tech or National Diploma with a minimum of 5 years’ experience.
• ECSA registered.

Knowledge, skills and experience:

• Minimum of 8 years Mechanical design experience in the mining and minerals processing area in the design office and in the field.
• Well-developed computer skills and knowledge of word, databases, spreadsheets and discipline related application software.
• Site experience – construction and commissioning.
• Slurry pumping experience.
• Materials Handling experience.
• Mechanical Package experience.

Personal attributes:

• Good verbal, written, interpersonal and organisational skills.
• Good organizational, administration and time management skills.
• A proactive attitude.
• Personal integrity and trustworthiness.
• A common-sense approach to everyday life.
• A willingness to treat all people with respect, integrity and consistency.
• High levels of initiative and “get up and go” to manage own work flow to meet objectives.
• A capacity for persistence and resilience and patience in a sometimes-challenging environment.
• An appreciation of the value of teamwork and willingness to work as part of a team, providing support for other team members as required.

Click here to apply

Senior Mechanical Designer

Job Description

• To work in a safe manner, complying with and actively contributing to the company Health, Safety and Environmental HSE policies, manuals and procedures.  At all times considering the health, safety and welfare of fellow workers, visitors, clients, community, and the environment.
• Produce mechanical drawings in accordance with accepted Engineering practice and company draughting procedures
• Experienced and familiar with relevant CAD software packages including 3D design software)
• Be experienced in the use of Aveva and with 3D layout.
• Be experienced in conveyor and BMH equipment layouts & details.
• Be able to produce quality detail drawings in accordance with draughting standards, aligned with a demanding project schedule.

Responsibilities

• Primarily, undertake 3D CAD design modelling and 2D drafting annotations.
• Modelling of 2D Vendor drawings into 3D Models,
• Detailed design and production of mechanical models and drawings encompassing all aspects of a Mining Processing plant construction package in accordance with relevant standards and project requirements.
• Timely completion of mechanical deliverables to schedules.
• Adherence to project man-hour budgets.
• Adherence to company standards and procedures.
• Miscellaneous tasks such as vendor works inspections, material take-offs, standard drawings, and detail drawings.
• Production of drawings in accordance with established procedures, i.e., internal review, client review, checking, etc.
• Clarity and accuracy of drawings.
• Work closely with consultants, other disciplines, and Project/Study Managers to ensure that client’s objectives are met in a timely manner.
• Ensure compliance and take initiative for safety and environmental issues

Qualifications

Qualifications:

• Tertiary Technical Qualification, (National Diploma etc.)

Knowledge, skills and experience:

• Minimum of 5 to 8 years Mechanical design experience in the mining and minerals processing area in design office and in the field.
• Knowledge of Mineral Processing Plant equipment such Primary Crusher, Secondary Crushers, Tertiary Crushers, Vibrating Screens, Feeders, Stockpiles.
• A good understanding of the operation of belt conveyors and its various components.
• Well-developed computer skills and knowledge of design packages and discipline related application software.
• Experienced and familiar with relevant CAD software packages including 3D and company Drafting Procedure, knowledge of word, databases, and spreadsheets
• Knowledge of fabrication, construction and operations.
• Good understanding of mechanical technology.
• Checking skills with ability to work unsupervised, focus on task completion, initiative.
• Quick and accurate with methodical approach to allocated work areas.

Personal attributes:

• Good written and verbal communication skills.
• A proactive attitude.
• Personal integrity and trustworthiness.
• A common-sense approach to everyday life.
• A willingness to treat all people with respect, integrity and consistency.
• High levels of initiative and “get up and go” to manage own workflow to meet objectives.
• A capacity for persistence, resilience and patience in a sometimes-challenging environment.
• An appreciation of the value of teamwork and willingness to work as part of a team, providing support for other team members as required.
• Ability to work in remote locations

Click here to apply

Mechanical Designer

Job Description

• To work in a safe manner, complying with and actively contributing to the company Health, Safety and Environmental HSE policies, manuals and procedures.  At all times considering the health, safety and welfare of fellow workers, visitors, clients, community, and the environment.
• Produce mechanical drawings in accordance with accepted Engineering practice and company draughting procedures
• Experienced and familiar with relevant CAD software packages including 3D design software)

Responsibilities

• Detailed design and production of mechanical drawings encompassing all aspects of a Mining Processing plant construction package in accordance with relevant standards and project requirements.
• Timely completion of mechanical drawings to schedules.
• Adherence to project man-hour budgets.
• Adherence to company standards and procedures.
• Miscellaneous tasks such as vendor works inspections, material take-offs, standard drawings, and detail drawings.
• Production of drawings on time and within budget.
• Production of drawings in accordance with established procedures, i.e., internal review, client review, checking, etc.
• Clarity and accuracy of drawings.
• Work closely with consultants, other disciplines, and Project/Study Managers to ensure that client’s objectives are met in a timely manner.
• Ensure compliance and take initiative for safety and environmental issues

Qualifications

Qualifications:

• Tertiary Technical Qualification, (National Diploma etc.)

Knowledge, skills and experience:

• Minimum of 3 to 5 years Mechanical design experience in the mining and minerals processing area in design office and in the field.
• Knowledge of Mineral Processing Plant equipment such Primary Crusher, Secondary Crushers, Tertiary Crushers, Vibrating Screens, Feeders, Stockpiles.
• A good understanding of the operation of belt conveyors and its various components.
• Well-developed computer skills and knowledge of design packages and discipline related application software.
• Experienced and familiar with relevant CAD software packages including 3D and company Drafting Procedure, knowledge of word, databases, and spreadsheets
• Knowledge of fabrication, construction and operations.
• Good understanding of mechanical technology.
• Checking skills with ability to work unsupervised, focus on task completion, initiative.
• Quick and accurate with methodical approach to allocated work areas.

Personal attributes:

• Good written and verbal communication skills.
• A proactive attitude.
• Personal integrity and trustworthiness.
• A common-sense approach to everyday life.
• A willingness to treat all people with respect, integrity and consistency.
• High levels of initiative and “get up and go” to manage own workflow to meet objectives.
• A capacity for persistence, resilience and patience in a sometimes-challenging environment.
• An appreciation of the value of teamwork and willingness to work as part of a team, providing support for other team members as required.
• Ability to work in remote locations.

Click here to apply

Piping Designer/Checker

Job Description

• Technical Design Ability – Under supervision completes technical design work using company and client design methods, standards and data in line with Project requirements. Provision of support to designers.
• Technical Expertise – Possesses proficient levels of technical expertise required to do the job, however continuously work towards improving and updating technical abilities. Will personally seek out opportunities to develop technical knowledge base.
• Cross Discipline Project and Team Interaction – Appreciation of project set up and team structure across disciplines. Under guidance working with other discipline designers.   
• Understanding and meeting schedule and schedule dependencies – Awareness of personal targets for deliverable production and deliverable schedule.
• Commercial Awareness and Customer Focus – Under direction develops the engineering requirement.
• Interpretation of Engineering Requirements – Under direction develops the engineering requirement.

Responsibilities

• Keep informed of development in the field of computer and CAD applications as applicable to the Piping Drawing Office.
• Keep abreast of discipline developments, new technologies and techniques.
• Carry out technical investigations, produce technical reports as and when required.
• Advise the Chief Piping Designer of manpower requirements to meet work schedules within the budget allocation.
• Responsible for the correct interpretation and execution of all piping computer aided draughting functions within the Piping Drawing Office.
• Prepare document indices for projects to ensure that the scope of work is planned economically and that target dates are known.
• Submit monthly progress reports and drawing indices to the Project Manager / Project Engineering Manager.
• Review requests for changes and if outside the scope of work, submit to the relevant Project Manager / Project Engineering Manager an estimate of manhours, costs and any effect to programme under the approval of Chief / Principal Designer.
• Raise change flags when required, for work considered outside the original scope. Submit as approved, to the relevant Project Manager / Project Engineering Manager under the approval of Chief / Principal Designer.
• Review all information available for each phase of the project and report on delays in receipt of information to the Project Supervisor.
• Responsible for ensuring engineering and design quality, technical accuracy of drawings, specifications, procedures, etc produced within the Piping Drawing Office.
• Responsible for the execution of assigned work in accordance with applicable contract procedures and standards, within the manhour and cost budgets and project schedules.
• Responsible for ensuring adherence to clients and project standards.
• Responsible for ensuring that contract procedures on safety and quality control are followed.
• Responsible for adherence to Engineering Procedure for Design Safety and to ensure the adoption of safe attitudes towards piping design and that features affecting the safety and integrity of the projects are reviewed by appropriately authorised engineers from other groups/departments.
• Give guidance to Piping Designers if required.

Qualifications

Qualifications:

• N3 or Matric

Knowledge, skills and experience:

• Microstation CAD Software Package Version J or later
• 3D PDS experience
• Minimum 10 Years experience

Personal attributes:

• Initiative – Grasps new or unfamiliar concepts quickly and can effectively deal with complexity and ambiguity. Identifies issues in a constructive manner and recommends solutions.  Uses innovative and novel approaches to find solutions 
• Change and Adaptability – Gains awareness for, and an understanding of, the position of stakeholders.  Readily adapts to changing circumstances 
• Interpersonal Communications – Actively listens and seeks to understand others’ points of view.  Communicates openly and honestly to all levels of the organization. Expresses ideas and exchanges information clearly and persuasively
• Problem Solving – Grasps new or unfamiliar concepts quickly and can effectively deal with complexity and ambiguity.  Identifies issues in a constructive manner and recommends solutions.  Uses innovative and novel approaches to find solutions
• Planning, Organising & Execution Prioritizes and plans work activities.  Uses time efficiently.elati 

Click here to apply

Civil & Structural Engineer

Job Description

• Participates as a member of the civil engineering team on all company projects.
• May perform the function of Lead Civil Engineer on smaller projects, under the guidance of Senior or Principal Civil Engineer.

Responsibilities

• Performs engineering design calculations and prepares design sketches as required on assigned projects.
• Assists the civil designers in the preparation of civil and structural drawings.
• Reviews, and comments on civil and structural drawings under the guidance his/her supervising engineer.
• Reviews and comments on supplier documents and other discipline drawings under the guidance his/her supervising engineer.
• Attends progress meetings and assists in the preparation of project progress reports on behalf of his/her supervising engineer.
• Advises his/her supervising engineer of any slippages and their causes and proposed corrective action.
• Advises his/her supervising engineer of any technical problems and unresolved differences with other groups.
• Assists in the preparation of contract requisitions and schedules of quantity for civil and structural work on assigned projects.
• Liaises with construction personnel and addresses site queries during construction under the guidance his/her supervising engineer.

Qualifications

Qualifications:

• BSc (Civil Engineering) / BEng (Civil) 
• 3+ years relevant post graduate experience

Knowledge, skills and experience:

• Technical Expertise  – carries out technical design work to a high standard. Has a sound working knowledge of civil/structural engineering applications and techniques relevant to the project environment.
• Problem solving – ability to identify problems, determine possible solutions, Actively works to resolve problems by building on the experience of others.
• Analytical thinking – ability to identify issues, obtains relevant information, relate and compare data from different sources and identify alternative solutions.
• Communication – ability to convey information clearly and concisely to groups or individuals either verbally or in writing to ensure that they understand the information and the message. 
• Ability to listen and respond appropriately to others
• Continuous Improvement – places importance on professional development by working through training objectives and continuous improvement schedule. 
• Makes use of in house and external training opportunities. 
• Works towards professional registration and/or additional qualifications.

Personal attributes:

• Initiative – Grasps new or unfamiliar concepts quickly and can effectively deal with complexity and ambiguity. Identifies issues in a constructive manner and recommends solutions.  Uses innovative and novel approaches to find solutions 
• Change and Adaptability – Gains awareness for, and an understanding of, the position of stakeholders.  Readily adapts to changing circumstances 
• Interpersonal Communications – Actively listens and seeks to understand others’ points of view.  Communicates openly and honestly to all levels of the organization. Expresses ideas and exchanges information clearly and persuasively
• Problem Solving – Grasps new or unfamiliar concepts quickly and can effectively deal with complexity and ambiguity.  Identifies issues in a constructive manner and recommends solutions.  Uses innovative and novel approaches to find solutions
• Planning, Organising & Execution Prioritizes and plans work activities.  Uses time efficiently and strives to ensure that agreed schedule undertakings are met.

Click here to apply

Senior Civil Designer

Job Description

• Produce civil (concrete) models and drawings in accordance with accepted engineering practice and company drafting procedures. 
• To work in a safe manner, complying with and actively contributing to the company Health, Safety and Environmental HSE policies, manuals and procedures. At all times considering the health, safety and welfare of fellow workers, visitors, clients, community and the environment.

Responsibilities

• Detailed design and production of civil (concrete & rebar) models and drawings encompassing all aspects of a plant construction package in accordance with relevant standards and project requirements.
• Timely completion of models and drawings to schedules.
• Completion of error free drawings to sound engineering practices.
• Clarity and accuracy of drawings.
• Knowledge and adherence to Design Procedures.
• Knowledge of and adherence to applicable standards and the company Drafting Procedures.
• Accurate completion and timely submission of timesheets.
• Adherence to project man-hour budgets.
• Adherence to company Standards and Procedures.
• Assist with training of junior draughtspersons.

Qualifications

Qualifications: 

• Sound engineering background.
• Diploma in Engineering.

Knowledge, skills and experience:

• Minimum of 10 years design draughting experience, of which 5 years are in the mining and minerals processing area.
• Familiar with relevant 2D & 3D CAD software, company Drafting Procedures.
• Be experienced in the use of Revit for concrete & rebar.
• Be experienced in the use of Revit for architectural layouts & details.
• Be able to produce quality detail drawings in accordance with draughting standards, aligned with a demanding project schedule.
• Broad knowledge of construction and operations.
• Good understanding of technology.
• Experience with Process Plant design and layout.
• Understanding of other discipline requirements.
• Checking skills with ability to work unsupervised, focus on task completion.

Personal attributes:

• An open mind to new ideas / concepts.
• Team player. and 

Click here to apply

Civil Designer

Job Description

• Checking concrete and reinforcement drawings in accordance with accepted Engineering practice and company drafting procedures. 
• To work in a safe manner, complying with and actively contributing to the company Health, Safety and Environmental HSE policies, manuals and procedures. At all times considering the health, safety and welfare of fellow workers, visitors, clients, community and the environment

Responsibilities

• Checking of drawings on time and within budget – encompassing all aspects of a plant construction package in accordance with relevant standards and project requirements.
• Clarity and accuracy of drawings.
• Knowledge and adherence to CAD Procedures.
• Knowledge of and adherence to applicable standards and the company Drafting Procedures.
• Accurate completion and timely submission of timesheets.
• Adherence to project man-hour budgets.
• Adherence to company Standards and Procedures.
• Assist with training of junior draughtspersons

Qualifications

Qualifications: 

• Sound engineering background.
• Diploma in Engineering.

Knowledge, skills and experience:

• Minimum of 10 years design draughting experience, specifically in the mining and minerals processing area.
• Familiar with relevant 2D & 3D CAD software, company Drafting Procedures.
• Broad knowledge of construction and operations.
• Good understanding of technology.
• Experience with Process Plant design and layout.
• Understanding of other discipline requirements.
• Checking skills with ability to work unsupervised, focus on task completion.

Personal attributes:

• An open mind to new ideas / concepts.
• Team player. and 

Click here to apply

Financial Accountant

Trending

Job Description

• Review and analysis of costs coded to contract within the accounting system to ensure charges are correct and adjust as applicable
• Undertake manhour reconciliations between systems to ensure all hours have been captured for invoicing and costing purposes
• Ensure invoices are prepared in a timely and accurate manner in line with contract terms and conditions and agreed invoice timetable
• Preparation of annual budget, quarterly and monthly forecast for contract in conjunction with Contract Manager in line with Wood reporting calendar
• Preparation of monthly accounts for contract covering reimbursable labour, recovered in rate costs, lump sums, procurement, plant & equipment, plus other reimbursable and non-reimbursable items.

Responsibilities

• Directly responsible for contract month end close activities in the ERP system to ensure results are accurately reported and analysed.
  • Main activities include calculation of accruals, unbilled and unearned entries as required in compliance with Wood corporate deadlines, technical accounting standards, and in accordance with company procedures for reconciliations and balance sheet controls.
• Completion of monthly financial report comprising detailed:
  • Profit and loss comparison of actuals against budget/forecast capturing clear and concise operational commentary for variances
  • Balance sheet analysis focusing on unbilled, unearned, accounts receivable, and cost accruals or deferrals, explaining the nature and age of balance and movement from prior month, plus resolution plan for clearance of aged items
  • Rolling forecast for year, and reasons for change from prior forecast
  • Days Sales Outstanding
  • Upsides / downsides to results and likelihood of items being realised
  • Any other detailed analysis that may be relevant to the contract
  • Reporting of monthly results to contract manager to ensure visibility of actual performance and any actions required in specific areas.
• Active management of cash to ensure payment is received from client in line with payment terms, optimisation of Days Sales Outstanding and minimisation of unbilled items
• Ensure all finance reconciliations are prepared, analysed and reviewed on a monthly basis to establish over/under-recoveries and enable any corrective actions to be taken in a timely manner
• Knowledge of contract commercials to understand rate build-ups and recovery of costs to ensure maximisation cash position
• Responsible for identifying and highlighting opportunities for continuous improvement within the contract and sharing of best practice within the function
• Responsible for maintaining contract delegation of authority matrix in line with any personnel changes on the contract
• Ensure compliance with accounting, credit risk and code of conduct policies
• Ensure all contracts process and procedures used on contracts are fully documented
• Liaising with external, internal and client auditors
• Effective supervision and management of the accounting team, with a focus on people development
• Execution of various ad hoc tasks as and when requested

Qualifications

Qualifications:

• Recognised accounting qualification with completed articles
• Bcom (minimum)
• Chartered Accountant
• Minimum 5 year working experience

Knowledge, skills and experience:

• Mining/Oil & Gas Engineering experience preferred
• Extensive accounting experience
• Proficient user of Excel
• People supervision skills
• Good commercial knowledge
• Competent at using ERP/ forecasting systems
• Dynamics MS/JD Edwards experience preffered
• Oracle Finance knowledge an added advantage

Personal attributes:

• Ability to respond in a professional and efficient manner to all client (internal and external) requests
• Ability to plan work priorities and work to schedule
• Ability to maintain confidentiality of information
• Ability to work under pressure during peak work times during the monthand networking ability

Click here to apply

Senior Structural Designer

Job Description

• Produce infrastructure models and drawings in accordance with accepted Engineering practice and Wood draughting procedures.
• To work in a safe manner, complying with and actively contributing to Health, Safety and Environmental HSE policies, manuals and procedures. At all times considering the health, safety and welfare of fellow workers, visitors, clients, community and the environment.
• Be experienced in the use of Aveva E3D for steelwork modelling and drawings
• Be accustomed to working within a multi-disciplinary environment
• Be able to produce quality detail drawings in accordance with draughting standards, aligned with a demanding project schedule

Responsibilities

• Production of models and drawings on time and within budget.
• Clarity and accuracy of models and drawings.
• Knowledge and adherence to design procedures.
• Knowledge of and adherence to applicable standards and the company Drafting Procedures.
• Completion of error free drawings to sound engineering practices.
• Accurate completion and timely submission of timesheets.
• To actively pursue excellent Health, Safety and Environmental performance standards and to encourage all staff to achieve or out perform the indicated HSE KPI’s of the company
• Detailed design and production of structural models and drawings encompassing all aspects of a plant construction package in accordance with relevant standards and project requirements.
• Timely completion of drawings to schedules.
• Adherence to project man-hour budgets.
• Adherence to company Standards and Procedures.
• Assist with training of junior draughtspersons.

Qualifications

Knowledge, skills and experience:

• Minimum of 10 years design draughting experience, of which 5 years are in the mining and minerals processing area.
• Familiar with relevant 2D & 3D CAD software, company Drafting Procedures.
• Experience using Aveva E3D preferred.
• Broad knowledge of construction and operations.
• Good understanding of technology.
• Experience with Process Plant design and layout.
• Understanding of other discipline requirements.
• Checking skills with ability to work unsupervised, focus on task completion.

Personal attributes:

• An open mind to new ideas / concepts.
• Team player. and 

Click here to apply

We wish you all the best with your applications